Product Details:
|
High Light: | Power Supply Equipment SPD Surge Protectors,RS485 Surge Protective Device,60kA Power Surge Protector |
---|
Power Supply Surge Protective Device
Product introduction:
Installation:
1/ Install on 35mm rail;
2/ It is necessary to series connect a fuse or air switch with SPD.
B: Class Ⅱ
Class | Ⅱ | ||||
Type | SDZ-60/275 | SDZ-60/385 | SDZ-60/400 | SDZ-60/420 | NPE |
Max. continuous operation voltage (Uc) | 275V | 385V | 400V | 420V | 255V |
Protection voltage Up | <1.5kV | <2.0kV | <2.2kV | <2.3kV | <1.5kV |
Power Supply | 1 phase/ 3 phases | 1 phase/ 3 phases | 1 phase/ 3 phases | 1 phase/ 3 phases | 1 phase/ 3 phases |
Nominal discharge current, In (8/20μs) | 40kA/phase | 40kA/phase | 40kA/phase | 40kA/phase | 40kA/phase |
Max. discharge current, lmax (8/20μs) | 60kA/phase | 60kA/phase | 60kA/phase | 60kA/phase | 60kA/phase |
Leakage current | <20μA | <20μA | <20μA | <20μA | / |
Cross section of connection wire | 16mm2~25mm2 (Mul.) | 16mm2~25mm2 (Mul.) | 16mm2~25mm2 (Mul.) | 16mm2~25mm2 (Mul.) | 16mm2~25mm2 (Mul.) |
Protection mode | L-PE; L-N; N-PE | L-PE; L-N; N-PE | L-PE; L-N; N-PE | L-PE; L-N; N-PE | L-PE; L-N; N-PE |
Environment condition | -40℃~+85℃ | -40℃~+85℃ | -40℃~+85℃ | -40℃~+85℃ | -40℃~+85℃ |
Dimension (mm) | 90*30(n)*68 (n is quanity) | 90*30(n)*68 (n is quanity) | 90*30(n)*68 (n is quanity) | 90*30(n)*68 (n is quanity) | 90*30(n)*68 (n is quanity) |
Installation | 35mm std. rail | 35mm std. rail | 35mm std. rail | 35mm std. rail | 35mm std. rail |
Contact Person: Mr. xue feng
Tel: +86 13709223751